e79 help Xenon board.

1. 
   

   
   
   So after months of being jtaggless, I've finally managed to get myself a nand-x. Nifty little bugger...(so much faster than the lpthack)... well anyway after finally getting the nand x to read and dump I've come to a halt with this e79... I originally had the nand-x jtag QSB's installed but removed them once the traces became nullified... and I've now moved back to the original 2diode/jumper method... and I'm still getting the e79. Any tips suggestions questions or comments are welcome. I'm baffled.

   I am going to quest your trying to flash Freeboot or XBR try flashing Xellous and see if that boots then you will know if your connections are correct.
   
   Download Free60 XELL for your motherboard Xenon (xenon_1921_hack-20090911.rar) then go and download Xellous v1.0
   
   Then when you have downloaded them dump your raw kv from your orig dump,
   
   

   Code:

   nandpro origdmp.bin: -r16 kv.bin 1 1

   Then inject it in to free60xell,
   
   

   Code:

   nandpro free60xell.bin: -w16 kv.bin 1 1

   Then inject xellous,
   
   

   Code:

   nandpro free60xell.bin: +W16 xell-1f.bin 40

   Then flash it to your jtag,
   
   

   Code:

   nandpro usb: -w16 free60xell.bin 0

   And if that boots up correctly without any errors then you have compiled Freeboot/XBR wrong, if you still get the e79 then there is a hardware error somewere let me know how you get on and if you have any problems aim me